JUAL LIQUID CONTROL FLOW METER
HARGA TIDAK MENGIKAT
SILAHKAN HUBUNGI KAMI UNTUK KETERSEDIAAN STOCK DAN SPESIFIKASI 0812-9615-7448
Liquid Controls positive displacement (PD) flowmeters provide the industry’s most time-proven record of superior accuracy,
performance, and long-term durability in custody transfer of refined and alternative fuels.
SIZE:
M-5® – 1.5″ Flange, 60 GPM (227 LPM), 150 psi (10.3 bar, 1034 kPa)
M-7® – 2″ Flange, 100 GPM (378 LPM), 150 psi (10.3 bar, 1034 kPa)
M-10® – 2″ Flange, 150 GPM (567 LPM), 150 psi (10.3 bar, 1034 kPa)
M-15® – 3″ Flange, 200 GPM (756 LPM), 150 psi (10.3 bar, 1034 kPa)
M-25® – 3″ Flange, 300 GPM (1134 LPM), 150 psi (10.3 bar, 1034 kPa)
M-30® – 4″ Flange, 350 GPM (1323 LPM), 150 psi (10.3 bar, 1034 kPa)
M-40® – 4″ Flange, 450 GPM (1701 LPM), 150 psi (10.3 bar, 1034 kPa)
M-60® – 4″ Flange, 600 GPM (2268 LPM), 150 psi (10.3 bar, 1034 kPa)
M-80® – 6″ Flange, 800 GPM (3024 LPM), 150 psi (10.3 bar, 1034 kPa)
METER FLOW RATES vs. VISCOSITY
Use the chart below to determine maximum meter flow rate relative to meter bearing material and product viscosity:
Determine the percent of rated capacity at which the meter will be required to operate;
Determine product viscosity at system operating temperature;
Plot the point on the chart where the two lines intersect;
Determine the meter bearing material from construction/application table above and locate the corresponding slope on the chart.
If the plotted point is above the bearing material slope, you are outside the allowable pressure loss for the specified meter and bearing. You should either chose a larger meter, reduce flow rate, or consider alternative bearing materials