UNTUK INFORMASI LEBIH LANJUT SILAHKAN HUBUNGI KAMI 0812 9615 7448 The BM Series flow meter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, such as turbulence from nearby valves, bends, and other system conditions. FLOW RATE: 660 GPM (2500 LPM) Continuous MAX FLOW RATE: 800 GPM (3000 LPM) Intermittent FLANGES: 4” ANSI 150 (RF or FF) MAX WORKING PRESSURE: 230 psi (16 bar) VOLUME PER REVOLUTION: 1.5 gallons (5.75 liters) ACCURACY ±0.075% with linearized pulser, ±0.125% or better with bare meter. REPEATABILITY 0.02% or better OPERATION: The product enters the meter and causes the rotor to revolve by pressure on the vanes. The proximity of the rotor to the body forms an efficient seal, while the profile of the body ensures that the vanes are guided through the measuring crescent, where the volume of product is accurately measured. An extension shaft driving through a pressure tight gland in the meter front cover, transmits the rotor revolutions either directly to a pulse transmitter or by gearing to a step-less mechanical calibrator driving a mechanical register. A calibrating mechanism and mechanical register are also attached to the front end cover. The calibrating mechanism can be replaced by a front cover incorporating a pulse transmitter when required for electronic systems, such as MASTERLOAD II™ and LCR.iQ™ registers. CONTRUCTION: BODY: CARBON STEEL - ASTM 216 WCB END COVERS: CARBON STEEL ROTOR: ALUMINUM ALLOY VANES: CARBON BEARINGS: NON CORRODIBLE STAINLESS STEEL SEALS: HIGH NITRILE or FLUOROCARBON HARGA TIDAK MENGIKAT UNTUK STOK DAN SPESIFIKASI MOHON MENGHUBUNGI SALES KAMI.